Egress Window Wells Built for Denver Clay and Spring Snow
The well is the part of an egress window you stand in on the way out. In Denver it also catches spring snow and sits in clay that swells when it gets wet, so its size, drain and cover all matter.
An egress window well in Denver must be at least 9 sq ft, reach 36 in out from the wall and span 36 in, with a fixed ladder once deeper than 44 in. Fixr lists covers at $120–$700 and ladders at $150–$225 (2025), and Denver exempts both from permits.
What size and ladder does an egress well need?
- Floor area: 9 sq ft or more, with at least 36 in from the wall to the far side and 36 in across (R319.4.1).
- Room for the sash: the window has to open fully inside the well, so casement swing counts.
- Ladder or steps: required once the well is deeper than 44 in, permanently fixed and clear of the open window (R319.4.2).
- Rungs: at least 12 in wide inside, standing 3 in or more off the wall, no more than 18 in apart from bottom to top.
Shallow half-round liners put in decades ago for daylight often miss these sizes. Measure before counting an old well as an exit.
Where does the water in a Denver window well go?
The code's answer is the foundation drain: a well is supposed to connect to the house's foundation drainage system, unless the foundation sits on well-drained sand or gravel (R319.4.3). Gravel in the bottom with no outlet only hides the water.
On clay the reason is practical. The Colorado Geological Survey names ponding water near a foundation and irrigation beside it among the common causes of swelling-soil damage. May is Denver's wettest month at 2.29 inches (NOAA normals), and summer storms add more. Keep downspouts and sprinkler heads aimed away from the well, and ask the specialist where its drain will run.
Covers for March snow and freezing nights
Denver-Stapleton averages 49.0 inches of snow a year, and March is the snowiest month at 8.8 inches (NOAA 1991–2020). Heavy, wet spring snow drifts into open wells, and with about 156 nights a year at or below freezing it can turn to ice against the glass. A cover keeps most of it out.
The rule for covers is about getting out. A cover, grate or screen over an escape well must come off or open from inside without a key, a tool, special knowledge or more force than the window takes (R319.4.4). Denver's code lists window well covers and ladders as work that needs no permit, so it is worth checking yourself that a chosen cover meets that test. Ask what load the cover is rated for before anyone stands on it.
Wells near the lot line or on a landmark house
Denver's permit checklist for new homes and additions asks for each well's length and width and how it fits the zoning code's setback exceptions, which vary by zone district. On a landmark property or in a historic district, the well is part of the egress window that Landmark Preservation reviews. For the full price picture, including digging out a new well at $3,000–$7,000, see the egress window and well costs for Denver.
Questions homeowners ask
Do I need a permit to add a window well cover in Denver?
No. The 2025 Denver Building Code lists window well covers and ladders regulated by the residential code as work exempt from permits. The cover still has to meet the escape rule: it must lift, open or come off from inside without a key, a tool, special knowledge or more force than opening the window takes.
Which basement wall are you thinking about?
A line or two is plenty: a bedroom planned downstairs, a window up by the joists, a well that fills with snow, a crack in the wall. One independent specialist who works in Denver will get in touch to talk it through.